Saturday, September 6, 2014

Browse » home » » » » » » » » » » » » » » » How to Install S7273TUIUAMI1 4 2 2 Jelly Bean Firmware for GTS7273T Galaxy Ace 3

How to Install S7273TUIUAMI1 4 2 2 Jelly Bean Firmware for GTS7273T Galaxy Ace 3

Samsung Galaxy Ace GT-S7273T 3 (Brazil) can now be updated with the latest Android 4.2.2 official firmware S7273TUIUAMI1 Jelly Bean, which is being launched by Samsung. Galaxy Ace 3 was released this summer. The device that was released with Android 4.2.2 Jelly Bean android version and have not received any further. 3 S7273T Galaxy Ace has received periodic firmware updates by Samsung, but if of your have not updated of your device then of your can now update UIUAMI1 Jelly Bean Android 4.2.2 using our simple tutorial below. of your can check the latest firmware available for your device via OTA (over the air) from Settings-About Phone-Software Update.


As the Galaxy Ace with Android 4.2.2 3 was released and have not received the Jelly Bean Jelly Bean Android 4.3 or Android version, of your can only expect a few bug fixes and performance improvements with the latest firmware update.

So, of your want to update 3 S7273T Galaxy Ace to Android 4.2.2 UIUAMI1 latest firmware Jelly Bean? For the official process, either of your can go for the OTA update to follow the path mentioned above or download and update the firmware via Samsung Kies utility. However, most of us prefer the manual way to update the official firmware. So, in this article of your will find step by step user guide for the Android 4.2.2 update on of your UIUAMI1 latest firmware 3 S7273T Galaxy Ace via ODIN.


Important Note:
"The firmware is released only for the Samsung Galaxy Ace 3 GT-S7273T model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".
Android 4.2.2 Jelly Bean S7273TUIUAMI1 Official Firmware Download List
Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Ace 3 GT-S7273T model.

Pre-Requisites:
  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:
  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.2.2 S7273TUIUAMI1 official firmware on Galaxy Ace 3 S7273T.

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy Ace 3 S7273T through Odin:


  1. Download Android 4.2.2 UIUAMI1 Firmware for Galaxy Ace 3 S7273T from the above list
  2. Download Odin 3.07
  3. Switch off your phone and boot Galaxy Ace 3 S7273T into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Ace 3 S7273T to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension.tar.md5
  9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension(The firmware file look something like: S7273TXXDLJ5_S7273TODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
Congrats! of your have completed the tutorial above to update Android 4.2.2 official firmware updates to Jelly Bean GT-S7273T Galaxy Ace 3. Hope you managed to do the update process. If youve followed everything as mentioned in the tutorial above, then of your now have 3 Galaxy Ace runs on the latest Android 4.2.2 Jelly Bean build UIUAMI1 version. of your can confirm the firmware update from Settings-About Phone. of your can contact us using the comment form below, if of your find a problem with the above tutorial and download links and also share of your experiences with us.
Posted by at
Labels: , , , , , , , , , , , , ,

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)