Free SOlution 4 You

Showing posts with label 2. Show all posts

Sunday, October 26, 2014

How to Root samsung Galaxy Note 2 N7100

On below article we will learn you How to Root Samsung Galaxy Note 2N7100, we’ll try by using simple instructions to offer you the main benefits of rooting that can offer you the possibility to install the new custom ROMs that will come on the future.
The pre requisites you will have to follow this guide are:

This rooting process is and work only for Samsung Galaxy Note 2 international version, model number N7100. For checking the model number follows the next path: “Settings > About Phone”.
After the device is rooted you’ll lose the warranty for your device, for get back your warranty is to re applying with the official firmware update, firmware that you currently have it.

It is very important when you make a rooting process for one device make a backup for all personal data stored on your device; that’s why we strangely recommend always saving your important data. Below you’ll find some ways to save your important data from your device.

For saving your SMS, please use “SMS Backup & Restore app”.
For saving your Contacts, please use “Sync with the Gmail application”.
For saving your stored Call Log, please use Call Log and Restore.
For saving your Images files, Songs and Videos files, and other important Files please Copy to internal / External SD Card.
For APN and MMS Settings, you can note down from the path “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names”

The battery charge level should not be less than 40 %, if your phone will discharge in the middle of the process can damage your device hardware or software.
We recommend turning off your antivirus protection and your firewall suites present in your smartphone, these protections can interrupt the firmware update process.

Note: – This post is only for the educational purpose. So if, anything happens to your device we are not responsible for that. Follow carefully all the instructions mention in this tutorial, all changes you’ll make on your device is only your own risk.

How to Root Galaxy Note 2 N7100 Android Phone:

First, download the Rooting Package for Galaxy Note 2 N7100 device.
Download Odin from here to your PC, and running the Odin app.
Extract the archives on your computer.
Now turn off your smartphone to can be entered in Download Mode.
Enter in Download Mode by pressing the Volume up button and Power button both on the same time while the phone is turned off.

Note: If your phone starts in the Normal Mode way, you should retry the procedure to enter in Download Mode.

Connect your Samsung Galaxy Note 2 with the original USB cables with your PC.
Now the Odin app should see that: ID: COM section will turn Yellow indicating. That means all the drivers are installed successfully.

Note: If ID : COM section doesn’t turn Yellow, please check Install USB Drivers in your computer and follow the next path “Settings > Wireless & Network > USB Settings” and verify if the “Samsung KIES” option is checked before connecting the smartphone to the PC.

Click on “PDA” button to select “cwm6-root-note2.tar.md5”, after you have selected the mentioned file, click “START” button.

The firmware update process is started now, when the rooting process is successfully made, the smartphone will restart automatically, in a normal way this restart take longer time and you should wait. When you’ll see the Home screen you can disconnect your smartphone.
The latest step is to verify if your device is rooted or not, for make this, please use the “Root Checker” app, application which you can download from the Google play Store.

Note: If your smartphone doesn’t boot up or refused to appear the Home screen, the you should press the power button a long time, to turn off your device and follow the tutorial from the begin.

Thursday, September 25, 2014

»Chittagong Kings Themes Songs mp3 2 82mb

Download Files:

Chittagong Kings Themes Songs.mp3 (2.82mb)

Download Now

Tuesday, September 23, 2014

Nokia x10 01 2 Sim Pinout

Nokia x10-01 (2 Sim) Pinout

Monday, September 22, 2014

Nokia Asha 501 Dual SIM RM 902 Latest Version 10 0 2 Flash File Free Download

Nokia Asha 501 Dual SIM RM-902 Latest Version 10.0.2 Flash File Free Download

Phone Name : Nokia Asha 501 Dual SIM
Product Type : RM-902
Firmware Version : 10.0.2
Variant Id : N/A
Varian Name : RM-902 NDT EURO EA1 B_GREEN NULL RU
Product Code : 059S9N9

File Name : RM902_059S9N9_hwt_v010.bin
File Size : 212 bytes

File Name : RM902_SD_4GB_Empty.img_10.0.2.cardverref.xml
File Size : 268 bytes

File Name : RM902_059S9N9_ccc_v010.bin
File Size : 488 bytes

File Name : S40NG_simlock_3gstandard_bb5.bin
File Size : 964 bytes

File Name : DC_WP8_Template_S40_v4.bin
File Size : 1,05 Kb

File Name : RM902_059S9N9_10.0.2_010.spr
File Size : 1,12 Kb

File Name : RM902_059S9N9_10.0.2_010_signature.bin
File Size : 1,52 Kb

File Name : RM902_059S9N9_10.0.2_010.vpl
File Size : 4,61 Kb

File Name : P11352003dpi600_label_layout.xml
File Size : 4,94 Kb

File Name : P11352003dpi600.pcx
File Size : 16,02 Kb

File Name : RM902_059S9N9_10.0.2_010.dcp
File Size : 163,18 Kb

File Name : rm902_10.0.2_059S9N9_ea1.rofs.fpsx
File Size : 4,11 Mb

File Name : RM902_SD_4GB_Empty.img_10.0.2.fpsimage
File Size : 8,06 Mb

File Name : rm902_10.0.2_059S9N9_ea1.image.fpsx
File Size : 25,63 Mb

File Name : rm902_10.0.2.mcusw.fpsx2_10.0.2.mcusw.fpsx
File Size : 28,21 Mb

Saturday, September 20, 2014

Install Pre Rooted Android 4 2 2 XXUAMC6 Jelly Bean firmware for the Samsung Galaxy S4 I9500

This guide contains all the instructions that you need to follow in order to install a pre-rooted Android 4.2.2 XXUAMC6 firmware on your Galaxy S4 I9500. It is an experimental release and we’re not sure that it works. This root appeared on XDA and it seems to be the first root file that you can flash on Samsung’s latest flagship device.
The Galaxy S4 will be launched at the end of this post but, an XDA member and developer, that goes by the name of AS I9000, managed to use the system dump files of Android 4.2.2 XXUAMCH firmware and create a new system.img file with added root and busybox. All these changes are included in a single .tar.md5 file and you can use to root the SGS4.
This root file doesn’t contain any Kernels, Recoveries nor Modem. It is stock Android 4.2.2 XXUAMC6 pre-rooted and busyboxed Jelly Bean firmware.In order to make sure that you successfully root your device using this guide, then you should first read the preparation info below:

The tutorial will work only with the Samsung Galaxy S4 model number I9500. It is the Exynos 5 Octa (eight-core) CPU variant of Galaxy S4. Don’t use this guide with the I9505 model as you will brick it.
Your Windows computer should have the Samsung USB drivers installed on it.
Try and backup all the data that’s currently stored on your device.
Enable USB Debugging option from the Developer Options menu. If you can’t find this menu, then you should open Settings, then ‘About phone’ section, scroll down to ‘Build Number’ and tap this 7 times. You will be told that ‘now you’re a developer’ or something like that.
Make sure that your computer doesn’t have any antivirus applications running in background. You’ll use the ODIN app to install this rooted firmware file and an antivirus app might consider ODIN to be malware. Note that it is a perfectly safe-to-use program.
The battery power left level should be over 40% before starting the root process. This will prevent the device from switching off.
Use this tutorial only if you’re an advanced user and you wish to test new rooted Android 4.2.2 releases on your Galaxy S4. Do not blame us in case you brick the phone or you lose any data files in the process.
Read all the instructions listed below and make sure that you won’t skip any steps.

Now that you know all of the above, you can continue to the next part of this post.

How to install rooted Android 4.2.2 XXUAMC6 Jelly Bean for the Samsung Galaxy S4 I9500:

Download the XXUAMC6 I9500 Rooted zip from HERE. Save the file on your PC and, when download is complete, extract its contents. You will get a file that has the ‘.tar’ or ‘.tar.md5′ extension.
Download Odin 1.85 from HERE. Extract its contents on your PC. NOTE: If Odin 1.85 fails to install the root, then you might want to try Odin 3.04 (here) or Odin 3.07 (here).
Power off your Galaxy S4 device.
Boot it into Download Mode by pressing and holding simultaneously Volume Down and Power buttons. When the Lcd powers ON you will need to press ‘Power’ once again for the Android Download Mode to appear. Get to the next step.
Launch Odin exe on your PC.
Now, connect your Galaxy S4 to your PC via USB data cable. Odin should say ‘added!!’ when the phone’s drivers have been successfully installed.
Next, click the ‘PDA’ button in ODIN. Browse your PC contents for the I9500XXUAMC6_I9500OXAAMC6_ROOT_ODEX.tar.md5 file. Load it into ODIN. Don’t change any default settings of ODIN, just make sure that the ‘Re-partition’ option is disabled.
Press the ‘START’ button when you’re ready for the installation. ODIN will take several minutes to complete the firmware flash process.
When the install is complete you will see that the phone has restarted and ODIN displays the ‘Pass’ message. You can unplug the phone from PC now.
The phone will reboot now and the last thing you need to do, is to check for the Superuser icon in the App drawer. If it appears, the root is now complete.

These were all the steps that you had to take in order to root your Samsung Galaxy S4 Exynos 5 Octa smartphone. If you cannot complete the guide, then you should ask for more help in our comments field.
Note that this is only a pre-rooted firmware and highly experimental. You might find some errors and bugs with this release or, it might not even work for some devices. We will know more after the Galaxy S4 will be officially released this late April.

Thursday, September 18, 2014

Symphony W32 Android Version 4 2 2 Firmware Flash File Free Download

Symphony W32 Android New Version Firmware Flash File Free Download,Symphony W32 Android Stock Firmware Flash File Free Download,Symphony W32 Custom Firmware Flash File Free Download,Symphony W32 Android 3G Version Firmware Flash File Free Download,Symphony W32 Android Version Firmware Flash File_Usb Driver+Latet Version Flasher Tool Free Download

Rom Size: 260 MB
Download

Tuesday, September 16, 2014

Download CM10 1 CM9 Sony XPERIA Z theme 2 0 4 Android Apk Free Download

Download CM10.1 CM9 Sony XPERIA Z theme 2.0.4 Android Apk Free Download

Current Version: 2.0.4

Requires Android: 4.0 and up

Category: Personalization

V2.0.4 update:

v2.0.4

Improved notification toggles

Support for new WhatsApp

Minor improvements

v2.0.3

Fixes and improvements

v2.0.2

Fixed improperly compiled error

Fixed CM9 Dialer

Minor fixes

v2.0.1

White dialer/phone

Updated People app

Updated Messaging app

Themed CM10.1 DeskClock

Minor improvements and fixes

v2.0.0

Based on leaked Jelly Bean firmware

Overview:

CyanogenMod 10.1, CyanogenMod 10, CyanogenMod 9 & AOKP Theme: Sony XPERIA Z UXP for the T-Mobile theme chooser

Please read all of this before complaining the theme doesnt work!!

If you have a problem, please send me an email instead of leaving a negative comment. I can help you via email, not via a comment..

FAQ

* Trebuchet force closes.

Solution:

- Go to recovery and select factory reset

- Download the theme but do NOT set it

- Go to Settings –> Apps –> Trebuchet and remove all possible data

- Now enjoy the theme!

* Theme is inproperly compiled error. Solution: Set system theme, reboot your phone, set Sony UXP theme

* When installing this theme, you may ignore the “Sorry, this theme is missing assets for your device’s Lcd size.” message!

********************************************************

Designed for both HDPI and XHDPI devices! Works on CM10.1 CM10, CM9 and AOKP ROMS!

Please have a look at this xda thread for instructions and feedback!

[Themed non-system apps]

- Apex Launcher

- Nova Launcher

- Trebuchet

- Action Launcher Pro

- ADW Launcher EX

- Default launcher

- Apollo

- Google Music

- Android music player

- Poweramp

- Go Contacts EX

- Go Dialer EX

- exDialer & Contacts

- Camera ICS

- Camera ICS+

- Camera JB+

- Camera Launcher for Nexus 7

Now supporting Android 4.2.1 JellyBean!

Download via Google Play:

CM10.1 CM9 Sony XPERIA Z theme 2.0.4 on Google Play

Download :

Download CM10.1 CM9 Sony XPERIA Z theme 2.0.4

Monday, September 15, 2014

Samsung Epic 4G SPH D700 Sprint Nightly install Android 4 4 2 KitKat PAC man ROM Guide How To Using Odin

Samsung Epic 4G SPH-D700 (Sprint) can be updated to latest Android 4.4.2 KitKat. The upgrade is possible with the help of custom ROM PAC-man. The development team of PAC-man ROM finally introduced Android 4.4.2 KitKat based PAC-man ROM for Samsung Epic 4G SPH-D700 (Sprint). Which means, you can download and install custom firmware PAC-man to update your Samsung Epic 4G SPH-D700 (Sprint) to latest Android 4.4.2 KitKat. Samsung Epic 4G SPH-D700 (Sprint) comes with good hardware spec, hence is capable to run PAC-man smoothly. PAC-man ROM consist various features of Paranoid Android, AOKP and CyanogenMod. The link Im sharing is PAC-man nightly build. The good thing about nightly build is, you will receive update daily and bugs are fixed faster as well as new feature introduced regularly. Continue reading this guide to know how to install Android 4.4.2 KitKat based PAC-man custom ROM on Samsung Epic 4G SPH-D700 (Sprint).
PAC-man comes with various useful customization. Since, PAC-man is based on Android 4.4.2 KitKat, you may like to know whats new on it. Some of the cool Android 4.4.2 KitKat features that you will enjoy is Screen Recording, Tap to Pay (Google Wallet for everyone), NFC emulation for non nfc devices, 14% less memory usage, cloud printing from Gallery, Google Home is the new Launcher, Core System Processes Trimmed, apps are efficient and responsive on all devices, the all new procstats tool details memory use, Full-Lcd Immersive mode, seamless change in resolution during media playback, Phone dialer got local business detection, redesigned Quickoffice and many more.
Please note, not all Android 4.4.2 KitKat feature yet ported to PAC-man ROM.

Another thing you should note, this is nightly build, hence expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a stable PAC-man build.
Warning!
This tutorial is only for Samsung Epic 4G SPH-D700 (Sprint). Don’t try this guide on any other Android device. Also, we (Android Pulp Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.
Pre Requisites:

1. ROM flashing require you to wipe your internal memory data, hence you required to backup your device data. You can follow our ultimate backup guide.

2. Make sure your device have at least 60% battery power. If your phone shut down during installation then there is good chance to brick your device.You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You must have USB Driver Installed for Samsung Epic 4G SPH-D700 (Sprint) in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise its wont be possible to transfer file between PC and Samsung Epic 4G SPH-D700 (Sprint). [Guide].

5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.1 and up installed. [General Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.2 KitKat based PAC-man ROM on Samsung Epic 4G SPH-D700 (Sprint).
File Required(Download by clicking on it)

PAC-man For Samsung Epic 4G SPH-D700 (Sprint) [Filename: pac_epicmtd-nightly-20140514.zip]

Google Apps [Filename: pa_gapps-stock-4.4.2-20140207-signed.zip]

How to Install Android 4.4.2 KitKat based PAC-man ROM on Samsung Epic 4G SPH-D700 (Sprint)

Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.

Disconnect USB and then turn off your Samsung Epic 4G SPH-D700 (Sprint).

Now, boot into recovery mode. To do so, press and hold Volume Down, Camera and Power button together and you should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power to select an option. Alternatively try this: Recovery Mode without Key Combination.

Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next Lcd, select Backup again. Go back to main recovery menu after backup is complete.

Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next Lcd to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.

Select install zip from sdcard, then select choose zip from sdcard. Now, locate the PAC-man Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next Lcd. The ROM installation will begin.

Once the ROM installation process end, repeat the step 6 but choose the pa_gapps-stock-4.4.2-20140207-signed.zip file instead of ROM zip to install the Google apps package.

When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Samsung Epic 4G SPH-D700 (Sprint) and boot up into Android 4.4.2 KitKat ROM PAC-man.

Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Tutorial For TWRP Recovery Users:

Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.

Disconnect USB and then turn off your Samsung Epic 4G SPH-D700 (Sprint).

Now, boot into recovery mode. To do so, press and hold Volume Down, Camera and Power button together and you should see recovery menu soon. Alternatively try this: Recovery Mode without Key Combination.

Create a Backup using TWRP Backup Option.

Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the Lcd do a Swipe on the ‘Swipe to factory reset‘ option.

Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the PAC-man Zip file. Then tap on Add More Zips, and add pa_gapps-stock-4.4.2-20140207-signed.zip. Now at the bottom of the Lcd, do a swipe on the Swipe to confirm flash option to begin flashing.

When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your Samsung Epic 4G SPH-D700 (Sprint) and boot up into Android 4.4.2 KitKat ROM PAC-man.

Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.

Congrats! Android 4.4.2 KitKat firmware based custom ROM PAC-man is now running on your Samsung Epic 4G SPH-D700 (Sprint). Now explore the latest Android 4.4.2 KitKat. [Note: If you find difficulties to run root only apps then it may be disabled. Do this then, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings].

Samsung Galaxy Ace 2 I8160 with Android 4 1 2 Jelly Bean Official Firmware How to Update Guide

Samsung Galaxy Ace 2 with model number GT-I8160 has received the latest Android 4.2.2 Jelly Bean update with firmware build number I8160XXNB1. The new official update is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.
Firmware details
PDA: I8160XXNB1
CSC: I8160OXXNB4
MODEM: I8160XXNB1
Version: Android 4.1.2
Build date: Feb 10, 2014
Regions: Slovakia, Cyprus, Germany, Hungary, Nordic countries
Samsung Galaxy Ace 2 I8160 users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide.
Pre-requisites
1. Install USB Drivers for Samsung Galaxy Ace 2 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The Android 4.1.2 XXNB1 Jelly Bean firmware is compatible only with Samsung Galaxy Ace 2 (GT-I8160). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Ace 2 by navigating to Settings >> About Phone.
Files Required

1. Android 4.1.2 XXNB1 Jelly Bean Firmware (Mirror Link) for Galaxy Ace 2 I8160

Slovakia: I8160XXNB1_I8160TMSNB1_TMS.zip
Poland: I8160XXNB1_I8160OXXNB4_XEO.zip
Romania (Cosmote): I8160XXNB1_I8160COANC1_COA.zip
Germany (1 & 1): I8160XXNB1_I8160XEGNC1_XEG.zip
Austria (T-Mobile): I8160XXNB1_I8160MAXNB1_MAX.zip
Hungary (T-Mobile): I8160XXNB1_I8160TMHNC1_TMH.zip
Austria (Telering): I8160XXNB1_I8160TRGNB1_TRG.zip
Poland (T-Mobile): I8160XXNB1_I8160TPLNB1_TPL.zip
Open Austria: I8160XXNB1_I8160ATONB2_ATO.zip
Hungary (Telenor): I8160XXNB1_I8160PANNB1_PAN.zip
Baltic: I8160XXNB1_I8160OXXNB4_SEB.zip
Cyprus (Cytamobile Vodafone): I8160XXNB1_I8160OXXNB4_CYO.zip
Slovakia: I8160XXNB1_I8160OXXNB4_XSK.zip
Germany: I8160XXNB1_I8160OXXNB4_DBT.zip
Nordic Countries/Finland: I8160XXNB1_I8160OXXNB4_NEE.zip
Hungary: I8160XXNB1_I8160OXXNB4_XEH.zip
2. Odin 3.07
Steps to Update Galaxy Ace 2 I8160 with Android 4.1.2 XXNB1 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Ace 2.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Ace 2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 7: Select the following files in Odin from extracted I8160XXNB1 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.
Samsung Galaxy Ace 2 I8160 should be now updated with official Android 4.1.2 XXNB1 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.
Note: If Galaxy Ace 2 I8160 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Saturday, September 13, 2014

Rooting Sprint Samsung Galaxy S4 L720 on Android 4 2 2 Jelly Bean using CF Auto Root

Sprint variant of the Samsung Galaxy S4 has received its own version of CF-Auto-Root, a tool designed by Chainfire which can be used to achieve root and open tons of extra features and functions. Use this tutorial to learn how to successfully flash all the required files without losing any data. This tutorial should be completed in under 5 minutes even if you’re not an advanced user.
Sprint Galaxy S4 users are usually rooting their devices in order to be able to flash new Custom ROMs or AOSP Jelly Bean operating systems that will get rid of the Samsung and Sprint bloatware. Custom ROMs, Kernel, new themes and other similar customization files. Such installation are released and created by developers for users who want to improve or test new Android interfaces and ROMs.
Rooting a Sprint Galaxy S4 phone is easy but, first, you will need to take a look at the preparation guide below so that you will manage to flash all the required files at your first attempt. Here’s what you have to know before continuing to the important part of this article:

this guide will work only with the Sprint variant of Samsung Galaxy S4 model number L720. Don’t try to use this tutorial with any other Android smartphone or tablet, as that might brick the phone and you will then be forced to reinstall stock Android, a process that will remove all the contents from your device.
after you apply the root, the phone might not want to boot into normal mode, which is why you might still be forced to ‘factory reset’ the S4 using the stock Recovery. You will find more info at the end of this post.
install the Samsung USB Drivers on your computer. If you already have them installed, then you can skip this step.
in order to root your phone, you will need to use the ODIN and the phone’s Download Mode. Odin can be found in the tutorial, while the Download Mode can be accessed like this.
enable USB Debugging from your device’s Developer Options. If this menu is not shown in your phone’s Settings menu, then you will have to tap About Phone and then press 7 times the Build Number section. The Android Developer menu should now be enabled.
disable Samsung KIES software before starting to root your device.
disable antivirus programs from running on your PC, these types of applications are usually interfering with ODIN and similar other tools.
the phone’s battery should have enough power left before discharging completely, as you wouldn’t want for the Sprint Galaxy S4 to power off in the middle of the updating process.
using this tutorial and CF Auto Root tool will increase the binary flash counter of your smartphone’s firmware, the warranty will be voided because of this. You can restore warranty only if you decide to flash a stock Sprint / Samsung Android 4.2.2 Firmware over the rooted one.
try to backup some of your most important data before starting the root process, this guide shouldn’t remove any data but, it would be best if you would create copies.
note that we cannot be blamed in case you brick your phone or, you manage to lose any data files in the process.
read all the info listed in this article and start rooting only when you’re sure that you can complete it.
if you cannot finish the root, then you can ask for extra help in comments and we will try to offer you viable solution for any problems that you might encounter in the process.

These were all the preparation instructions that you had to go over before starting to root your device.
CF-Auto-Root tool will not install any custom Recoveries, but you can use the GooManager or ROM Manager applications to flash a recovery image. If you have any other questions, post them in our comments section. Don’t skip any actions that are listed below.

How to root Sprint Galaxy S4 L720 on Android 4.2.2 Jelly Bean using CF-Auto-Root:

Download the CF-Auto-Root zip for Sprint SGS4 from here.
Extract the contents of this zip and place them all into a single folder on your PC. You will obtain a file named ‘CF-Auto-Root-jfltespr-jfltespr-sphl720′ with the .tar.md5 extension, don’t extract any further than that.
Download Odin 3.07 from here. Save the file on PC and unzip it after the download is complete.
Power off your smartphone now.
Boot the smartphone in Download Mode. After that you can continue to the next step.
Launch ODIN exe on your computer.
Connect your device to your PC via USB cable. Wait for ODIN to display the ‘added!!’ message before getting to the next step.
> if Odin doesn’t recognize your Sprint Galaxy S4, then you should try to use another USB port or re-install the Samsung USB drivers, a download link is provided in the preparation guide above.
Now, go to Odin, click the PDA button.
Browse your PC for the ‘CF-Auto-Root-jfltespr-jfltespr-sphl720.tar.md5′ and load it. Leave all ODIN default settings unchanged and make sure that the Re-Partition one is not enabled.
Press the START button whenever you’re ready to start the root of your Sprint Galaxy S4. This process shouldn’t take more than 10 minutes to complete.
When all files have been successfully flashed, you will notice that your phone has restarted. Unplug the SGS4 from computer and wait for it to boot into normal mode.
Look in the App drawer and check for the SuperSU app icon. That means that the root has been achieved with success.

NOTE: in case ODIN doesn’t complete the install, it shows the FAIL alert or any other errors, then you have to immediately unplug the Sprint Galaxy S4 from your computer. Remove the phone’s battery, re-insert it after 5 seconds have passed and close ODIN. Next, you have to repeat the entire tutorial once again starting with step 5. This time make sure that you don’t skip any steps that I have listed above.
In case you did manage to root your phone without problems and the home Lcd of Android 4.2.2 Jelly Bean loaded successfully, then you can close this guide as you’ve completed all the required steps.
NOTE2: If ODIN says ‘PASS’ but your smartphone is unable to go past the Samsung boot animation, then you have to boot into stock Recovery mode and ‘factory reset’ the Galaxy S4. This means that you will lose installed apps and other contents stored on your device. This process will force the device to boot with the rooted firmware. Here’s what you need to do:

power off the phone completely by removing its battery.
re-insert the battery.
press and hold Volume Up, Home and Power buttons, all at the same time.
release the buttons when the Lcd flashes and wait for the main Recovery menu to appear.
select ‘wipe data/ factory reset’ option and confirm the process.
select ‘reboot system now’ and wait several minutes until your device completes the first boot process with the new rooted Jelly Bean ROM.

This tool did not install a custom Recovery image, which is why you might want to install it yourself using GooManager for TWRP Recovery, or ROM manager app for CWM Recovery. If you don’t know how to do that, then you can check the tutorial guide here.
If you have any extra questions, post them below in the comments section.

How to Install E470SKSUANA1 For Galaxy S4 Active E470S 4 2 2 JB Firmware Guide

Samsung Galaxy S4 Active SHV-E470S (Korean Variant, Snapdragon 800) recently received the E470SKSUANA1 Android 4.2.2 Jelly Bean official firmware update, which is being rolled out by Samsung. The device already get 4.2.2 update and this is the latest available firmware update by Samsung for the device. If you yet to update your device to this latest firmware update then you can now update the KSUANA1 Android 4.2.2 Jelly Bean using our simple tutorial below. You can check latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.

As the Galaxy S4 Active E470S was released with Android 4.2.2 Jelly Bean and not yet received Android 4.3 Jelly Bean or later Android version, you can only expect few bug fixes and performance enhancement with this latest firmware update.

So, want to update your Galaxy S4 Active E470S to the latest KSUANA1 Android 4.2.2 Jelly Bean firmware? For official process, either you can go for OTA update by folloS4 Activeg the above mentioned path or download and update firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.2.2 KSUANA1 firmware on your Galaxy S4 Active E470S through Odin.

Important Note:

"The firmware is released only for the Samsung Galaxy S4 Active SHV-E470S model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on S4 Activedows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Android 4.2.2 Jelly Bean E470SKSUANA1 Official Firmware Download List

South Korea (sk telecom): SKT-E470SKSUANA1-20140124092542.zip

Samsung Galaxy S4 SHV-E470S Korean Rooting Guide

Pre-Requisites:

Check battery percentage, your device should have at least 60% battery power
Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to Install Android 4.2.2 E470SKSUANA1 official firmware on Galaxy S4 Active E470S.

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy S4 Active E470S through Odin:

Download Android 4.2.2 KSUANA1 Firmware for Galaxy S4 Active E470S from the above list
Download Odin 3.07
Switch off your phone and boot Galaxy S4 Active E470S into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot Lcd appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy S4 Active E470S to your computer via USB cable
In Odin3 Lcd, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
In Odin Lcd, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: E470SXXDLJ5_E470SODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish

Congrats! you just completed the tutorial to update latest Android 4.2.2 Jelly Bean official firmware on Galaxy S4 Active SHV-E470S. Hope you successfully completed the update process. If you followed everything as mentioned in the above tutorial, then your Galaxy S4 Active should now running on the latest Android 4.2.2 Jelly Bean build version KSUANA1. You can confirm the firmware update from Settings-About Phone. If you find any problem with the above tutorial and download link, feel free to contact with us using the comment form below and also share your experience with us.

Monday, September 8, 2014

How to Update Galaxy Young GT S6310L To UBAMI1 4 1 2 JB Official ROM

Samsung Galaxy GT-S6310L Young (Latin) users can easily update their devices to Android 4.1.2 official firmware UBAMI1 Jelly Bean. Samsung has just released an OTA update of the firmware. S6310LUBAMI1 latest firmware build version. The Galaxy Young was released in February of this year with Android 4.1.2 Jelly Bean. Samsung has not released the Android 4.2.2 version of android Jelly Bean or more for the device. If you already have the tools and the latest firmware is not updated, the latest firmware update using our simple tutorial below. You can check the latest available firmware for your device via OTA (over the air) from

Settings-About Phone-Software Update.

Because Young Galaxy has been running on Android 4.1.2 Jelly Bean, you can only expect a slight bug fixes and performance enhancements with this update. So, want to update to the latest S6310L Galaxy Young UBAMI1 Jelly Bean Android 4.1.2 firmware? To install the official way, either you can go for the OTA update as mentioned above or download the firmware via Kies theSamsung utility. However, most of us prefer the manual way to update the official firmware. So, in this article you will enjoy the step-by-step user guide for the Android 4.1.2 update UBAMI1 latest firmware on your Galaxy Young S6310L via Odin.

Important Note:

"The firmware is released only for the Samsung Galaxy Young GT-S6310L model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Youngdows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Android 4.1.2 Jelly Bean S6310LUBAMI1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Young GT-S6310L model.

Colombia: CGU-S6310LUBAMI1-20130930102918.zip

[Firmware for rest of the countries and carrier will be added here when available]

Previous Firmware Build

Venezuela: VMT-S6310LUBAMH1-20130922124220.zip

Chile (Entel PCS): CHE-S6310LUBAMH1-20131028113446.zip

Pre-Requisites:

Check battery percentage, your device should have at least 60% battery power

Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging

Backup important data and settings to external storage- follow this guide

Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be Noted:

If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.1.2 S6310LUBAMI1 official firmware on Galaxy Young S6310L.

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Young S6310L through Odin:

Download Android 4.1.2 UBAMI1 Firmware for Galaxy Young S6310L from the above list
Download Odin 3.07
Switch off your phone and boot Galaxy Young S6310L into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot Lcd appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Young S6310L to your computer via USB cable
In Odin3 Lcd, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension.tar.md5
In Odin Lcd, click on PDA button and select the firmware file with .tar.md5 extension(The firmware file look something like: S6310LXXDLJ5_S6310LODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish

Congrats! you complete the tutorial for Android 4.1.2 official firmware update Jelly Bean on Galaxy GT-S6310L young. Hope you managed to do the update process. If youve followed everything in the tutorial as mentioned above, then you should now young Galaxy runs on the latest Android 4.1.2 Jelly Bean build UBAMI1 version. You can confirm the details of the firmware update from Settings-About Phone. If you are stuck in a point or find any problems with the download link, then please do not hesitate to contact with us using the comment form below.

Saturday, September 6, 2014

How to Install S7273TUIUAMI1 4 2 2 Jelly Bean Firmware for GTS7273T Galaxy Ace 3

Samsung Galaxy Ace GT-S7273T 3 (Brazil) can now be updated with the latest Android 4.2.2 official firmware S7273TUIUAMI1 Jelly Bean, which is being launched by Samsung. Galaxy Ace 3 was released this summer. The device that was released with Android 4.2.2 Jelly Bean android version and have not received any further. 3 S7273T Galaxy Ace has received periodic firmware updates by Samsung, but if of your have not updated of your device then of your can now update UIUAMI1 Jelly Bean Android 4.2.2 using our simple tutorial below. of your can check the latest firmware available for your device via OTA (over the air) from Settings-About Phone-Software Update.

As the Galaxy Ace with Android 4.2.2 3 was released and have not received the Jelly Bean Jelly Bean Android 4.3 or Android version, of your can only expect a few bug fixes and performance improvements with the latest firmware update.

So, of your want to update 3 S7273T Galaxy Ace to Android 4.2.2 UIUAMI1 latest firmware Jelly Bean? For the official process, either of your can go for the OTA update to follow the path mentioned above or download and update the firmware via Samsung Kies utility. However, most of us prefer the manual way to update the official firmware. So, in this article of your will find step by step user guide for the Android 4.2.2 update on of your UIUAMI1 latest firmware 3 S7273T Galaxy Ace via ODIN.

Important Note:

"The firmware is released only for the Samsung Galaxy Ace 3 GT-S7273T model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Android 4.2.2 Jelly Bean S7273TUIUAMI1 Official Firmware Download List

Brazil (TIM): ZTM-S7273TUIUAMI1-20131105090421.zip | Link2

Pre-Requisites:

Check battery percentage, your device should have at least 60% battery power
Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.2.2 S7273TUIUAMI1 official firmware on Galaxy Ace 3 S7273T.

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy Ace 3 S7273T through Odin:

Download Android 4.2.2 UIUAMI1 Firmware for Galaxy Ace 3 S7273T from the above list
Download Odin 3.07
Switch off your phone and boot Galaxy Ace 3 S7273T into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Ace 3 S7273T to your computer via USB cable
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension.tar.md5
In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension(The firmware file look something like: S7273TXXDLJ5_S7273TODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish

Congrats! of your have completed the tutorial above to update Android 4.2.2 official firmware updates to Jelly Bean GT-S7273T Galaxy Ace 3. Hope you managed to do the update process. If youve followed everything as mentioned in the tutorial above, then of your now have 3 Galaxy Ace runs on the latest Android 4.2.2 Jelly Bean build UIUAMI1 version. of your can confirm the firmware update from Settings-About Phone. of your can contact us using the comment form below, if of your find a problem with the above tutorial and download links and also share of your experiences with us.

Thursday, September 4, 2014

How to Update Galaxy Tab 3 7 0 SM T211 with Android 4 1 2 XXAML5 JB Official Firmware

The international 3G + Wi-Fi version of the Samsung Galaxy Tab 3 7.0 (SM-T211) has received another Android 4.1.2 Jelly Bean update with firmware build number T211XXAML5. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details

PDA: T211XXAML5
CSC: T211AUTAML1
MODEM: T211XXAML2
Version: Android 4.1.2
Build date: Dec 20, 2013
Regions: Switzerland

Samsung Galaxy Tab 3 7.0 SM-T211 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites

1. Install USB Drivers for Samsung Galaxy Tab 3 7.0 on the computer.

2. Enable USB Debugging Mode on your tablet by navigating to Settings >> Developer Options.

3. Make a backup of all your important data before following the guide.

4. The Galaxy Tab 3 7.0 should be factory unlocked and not locked to any particular carrier.

5. Ensure the battery of the tablet is charged more than 80 percent.

6. The Android 4.1.2 XXAML5 Jelly Bean firmware is compatible only with the 3G + Wi-Fi version of the Samsung Galaxy Tab 3 7.0 (SM-T211). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Tab 3 7.0 by navigating to Settings >> About Phone.

Files Required

1. Android 4.1.2 XXAML5 Jelly Bean Firmware (Mirror Link) for Galaxy Tab 3 7.0 SM-T211

2. Odin 3.07

Steps to Update Galaxy Tab 3 7.0 SM-T211 with Android 4.1.2 XXAML5 Jelly Bean Firmware

Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional)
Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Switch off Galaxy Tab 3 7.0.
Boot the device into Download Mode by pressing and holding Volume Down, Homeand Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Run Odin on the computer as an Administrator.
Connect the Galaxy Tab 3 7.0 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Select the following files in Odin from extracted T211XXAML5 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Startbutton to begin the installation process.
Once the installation process is completed, your device will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your tablet from the computer.

Samsung Galaxy Tab 3 7.0 SM-T211 should be now updated with the Android 4.1.2 XXAML5 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Tab 3 7.0 SM-T211 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Monday, September 1, 2014

Instant Guide Android 4 4 2 KitKat PAC man ROM Install For LG Optimus G E973 Canada Online Tutorial Free Download

LG Optimus G E973 (Canada) can be updated to latest Android 4.4.2 KitKat. The upgrade is possible with the help of custom ROM PAC-man. The development team of PAC-man ROM finally introduced Android 4.4.2 KitKat based PAC-man ROM for LG Optimus G E973 (Canada). Which means, you can download and install custom firmware PAC-man to update your LG Optimus G E973 (Canada) to latest Android 4.4.2 KitKat. LG Optimus G E973 (Canada) comes with good hardware spec, hence is capable to run PAC-man smoothly. PAC-man ROM consist various features of Paranoid Android, AOKP and CyanogenMod. The link Im sharing is PAC-man nightly build. The good thing about nightly build is, you will receive update daily and bugs are fixed faster as well as new feature introduced regularly. Continue reading this guide to know how to install Android 4.4.2 KitKat based PAC-man custom ROM on LG Optimus G E973 (Canada).
PAC-man comes with various useful customization. Since, PAC-man is based on Android 4.4.2 KitKat, you may like to know whats new on it. Some of the cool Android 4.4.2 KitKat features that you will enjoy is Screen Recording, Tap to Pay (Google Wallet for everyone), NFC emulation for non nfc devices, 14% less memory usage, cloud printing from Gallery, Google Home is the new Launcher, Core System Processes Trimmed, apps are efficient and responsive on all devices, the all new procstats tool details memory use, Full-screen Immersive mode, seamless change in resolution during media playback, Phone dialer got local business detection, redesigned Quickoffice and many more.
Please note, not all Android 4.4.2 KitKat feature yet ported to PAC-man ROM.

Another thing you should note, this is nightly build, hence expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a stable PAC-man build.
Warning!
This tutorial is only for LG Optimus G E973 (Canada). Don’t try this guide on any other Android device. Also, we (Android Pulp Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.
Pre Requisites:
1. ROM flashing require you to wipe your internal memory data, hence you required to backup your device data. You can follow our ultimate backup guide.
2. Make sure your device have at least 60% battery power. If your phone shut down during installation then there is good chance to brick your device.You can install an app like Battery Notifier BT Free on your Android device to check it easily.
3. You must have USB Driver Installed for LG Optimus G E973 (Canada) in your PC. [Download USB Drivers]
4. Make sure USB Debugging is enabled otherwise its wont be possible to transfer file between PC and LG Optimus G E973 (Canada). [Guide].
5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.1 and up installed. [General Guide]
If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.2 KitKat based PAC-man ROM on LG Optimus G E973 (Canada).
File Required(Download by clicking on it)

PAC-man For LG Optimus G E973 (Canada) [Filename: pac_e973-nightly-20140514.zip]
Google Apps [Filename: pa_gapps-stock-4.4.2-20140207-signed.zip]
Read Also:LG Optimus G E975 Android 4.4.2 KitKat PAC-man ROM

How to Install Android 4.4.2 KitKat based PAC-man ROM on LG Optimus G E973 (Canada)

Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
Disconnect USB and then turn off your LG Optimus G E973 (Canada).
Now, boot into recovery mode. To do so, press and hold Volume Up & Power until fastboot screen appears, then press Volume Down twice, then press Power to boot recovery [use volume buttons to scroll and Power button to select]. Alternatively try this: Recovery Mode without Key Combination.
Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
Select install zip from sdcard, then select choose zip from sdcard. Now, locate the PAC-man Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
Once the ROM installation process end, repeat the step 6 but choose the pa_gapps-stock-4.4.2-20140207-signed.zip file instead of ROM zip to install the Google apps package.
When installation is completed, go back to the main recovery menu and select reboot system now to reboot your LG Optimus G E973 (Canada) and boot up into Android 4.4.2 KitKat ROM PAC-man.
Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Tutorial For TWRP Recovery Users:

Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
Disconnect USB and then turn off your LG Optimus G E973 (Canada).
Now, boot into recovery mode. To do so, press and hold Volume Up & Power until fastboot screen appears, then press Volume Down twice, then press Power to boot recovery. Alternatively try this: Recovery Mode without Key Combination.
Create a Backup using TWRP Backup Option.
Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the PAC-man Zip file. Then tap on Add More Zips, and add pa_gapps-stock-4.4.2-20140207-signed.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your LG Optimus G E973 (Canada) and boot up into Android 4.4.2 KitKat ROM PAC-man.
Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.

Congrats! Android 4.4.2 KitKat firmware based custom ROM PAC-man is now running on your LG Optimus G E973 (Canada). Now explore the latest Android 4.4.2 KitKat. [Note: If you find difficulties to run root only apps then it may be disabled. Do this then, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings].

Free iPhone PC Suite 2 3 1 86 Full Download

iPhone PC Suite 2.3.1.86

This suite Works with 1.xx and 2.xx firmware

Here are some key features of "iPhone PC Suite":

· Download & Upload pics to and from PC and iPhone
· Camera
· Calendar
· Contacts
· SMS
· Photos- works 100% all in FULL RESOLUTION !!!! (upload / download)
· Notes
· eBook
· Call log
· SMS Chat- works 100%, send SMS to someone from PC through iPhone
· Safari, bookmark
· Finder
· Backup/Restore
· Sound Themes
· Ringtones - they wont get deleted when synced with itunes !!! and the app converts them automatically...!!

Download Link:

Saturday, August 30, 2014

Nokia Camera Repair Collections v2 2 By Manx rar 11 MB

download