Showing posts with label speaker. Show all posts
Showing posts with label speaker. Show all posts
Thursday, November 13, 2014
Nokia Asha 300 Speaker Problems Solution

nokia asha 300 speaker jumper solution ways
nokia asha 300 earpiece problem Repair Solution
Saturday, November 8, 2014
Nokia 101 Ringer And Speaker Ways Jumper

Nokia 101 Ringer Not Working
Nokia 101 Speaker Ways
Nokia 101 Speaker Ways
Saturday, October 25, 2014
Nokia 1800 and Nokia 1616 Earpiece and Ringer Speaker Solution
Heres the repair solution to solve and fix nokia 1800 and nokia 1616 Earpiece and Loud Speaker (Ringer/buzzer) failure. In nokia 1800 and nokia 1616 the earpiece and ringer circuit have been combined and connected to a single speaker unlike the old types which have both different speaker in each circuit.
The below solution picture shows the line paths and layout of components for the Earpiece Speaker.You may trace all of those corresponding components if having trouble with the earpiece or Earpiece Audio sound problem. The positive and negative audio signal which flow across into four coils, a chip resistor 4.6 ohms and an EMI filter chip before it being feeds to the Speaker terminal pads and so on to the speaker.

The two remaining components are chip resistors, this resistors are fusible resistors with has a zero ohms value. Both positive and negative Audio signals also flow into the two filter coils and the emi filter chip then feeds trough to the speaker.

All those components are very easy to check and you may find a replacement on it if found busted or damaged. If all of its corresponding components were already replace and making sure that all of it working perfectly okay but the problem still exists and no audio sound can be heard over the speaker, we may now consider that the problem lies on the line paths between the main IC or the IC itself is being damaged. connections.
The last solution solution for this is to reflow, rework the main IC component. Be sure to check the line paths of corresponding solder ball bumps of the IC component which holds the earpiece or the ringer loud speaker, after reballing it and inplacing it back.
Just be careful and have a good heat temperature and air flow control using you reworking station in handling the main IC module.
The below solution picture shows the line paths and layout of components for the Earpiece Speaker.You may trace all of those corresponding components if having trouble with the earpiece or Earpiece Audio sound problem. The positive and negative audio signal which flow across into four coils, a chip resistor 4.6 ohms and an EMI filter chip before it being feeds to the Speaker terminal pads and so on to the speaker.
Nokia 1800 and Nokia 1616 Earpiece Speaker components layout and line paths

The two remaining components are chip resistors, this resistors are fusible resistors with has a zero ohms value. Both positive and negative Audio signals also flow into the two filter coils and the emi filter chip then feeds trough to the speaker.
Nokia 1800 and Nokia 1616 Loud Speaker ( Ringer/Buzzer) line paths and components layout

All those components are very easy to check and you may find a replacement on it if found busted or damaged. If all of its corresponding components were already replace and making sure that all of it working perfectly okay but the problem still exists and no audio sound can be heard over the speaker, we may now consider that the problem lies on the line paths between the main IC or the IC itself is being damaged. connections.
Nokia 1800 and Nokia 1616 Earpiece and Ringer IC component solder ball bumps connection

Just be careful and have a good heat temperature and air flow control using you reworking station in handling the main IC module.
Wednesday, October 22, 2014
Nokia X3 Hands Free Ringer speaker No audio Sounds Solution
This solution covers to fix and repair Nokia X3 Hands Free Speaker No audio sounds can be heard or No ringtone sounds. the solution below shows particular components that needs to be check or by then replace if found damaged. If the loud speaker component is working well when checked up, you may proceed to check this highlighted components showed below, for it where the audio sounds signals is feeds from the audio IC module.Nokia X3 keypad problem full solution
Those components were composed of filter coils, it is easy check each of them by using a multimeter in a continuity test method. There are two channels in Hands Free speaker circuit the left speaker channel and the right channel. If only one channel is not working, you may concentrate only on that certain part. Just configure the solution above.
Read More..
Nokia X3 hand free, Ringer Speaker No Sounds solution

Saturday, October 18, 2014
Nokia 2330 Classic speaker ear piece problem solution jumper ways
If speaker is not working in Nokia 2330 Classic. We can not hear a voice call.Noice in ear peace speaker or low voice problem can be solve with this post.Read carefully all these tips and follow diagram that is given bellow to solve speaker problem solution in Nokia 2330 Classic.

In above diagram you can see red and blue lines.These lines are tracks and paths that are used in speaker function in Nokia 2330 Classic. So check all these parts with meter and if any of them is missing apply jumper.You can apply jumper at points that are shown in diagram for repairing speaker problem solution.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
In above diagram you can see red and blue lines.These lines are tracks and paths that are used in speaker function in Nokia 2330 Classic. So check all these parts with meter and if any of them is missing apply jumper.You can apply jumper at points that are shown in diagram for repairing speaker problem solution.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Friday, September 26, 2014
Tuesday, September 23, 2014
Wednesday, September 10, 2014
Nokia asha 305 ringer speaker problem solution
This is Nokia asha 305 phones loud speaker problems hardware solution.If your phones has ringer problem that means ringer not work, low sound or bad sound. You will repair nokia 305 speakers all problem using this solution. There are showing Nokia 305 loud speaker line ways and which parts are faulty.


How to do this : If the speaker problem on your phone then open your phone and check speaker if damage speaker then replace speaker if speaker is ok but problem still then check red mark coil and diode. If you feel diode short then you can remove diode and If you feel coil is fuse then replace coil.If they are ok but problem still then check orange color ways.
You may also like :
Nokia asha 305 power button ways
Nokia asha 305 Mic problem solution
Nokia asha 305 Charging problem solution
Thursday, August 28, 2014
Wednesday, August 13, 2014
Sunday, August 10, 2014
Nokia 1202 ear speaker problem solution
Ear speaker is important for every cell phone when damage ear speaker then ear speaker is not work or low sound or bad noise. Now I post here nokia 1202 ear speaker solution
How to do this work : This red mark ic is one kind of switching ic.This ic just connect with ear speaker and loud speaker.When phone calling with normal mode sound then work ear only speaker when you active loud mode then working loud speaker.So when ear speaker not work then replace this ic.
Subscribe to:
Posts (Atom)
