Free SOlution 4 You

If ever encountered a black or dark LCD Lcd display on nokia 2710, this problem is cause by the LED backlight failure or it doesnt light up.
This solution may help fix and repair Nokia 2710 No LCD Screen Display Backlight LED problem that result to a dark Lcd display on the LCD.

If this problem happens you may then first try to install a new replacement LCD Lcd to ensure that the LCD LEDs caused the problem or not. if the Back light LEDs still does not work, you may then proceed to hardware troubleshooting and used this solution below.The solution above showed the LCD and keypad backlight LED driver circuit. this circuit holds and drive the LEDs to light up or works.
You may start to trace the LEDs positive ansd negative line paths from the LCD pin connector down to the components where it is being connected.
Check the LED driver IC supply voltage, this voltage has a rating value of 3.7 volts which feeds from the phones battery.
If all of the line paths and supply voltages were both fine, you may then proceed to replace the LED driver IC.Note: a damaged LED driver IC on nokia 2710 will also result to keypad backlight failure. Therefore if the keypad backlight is working and only the LCD display backlight does not work, this doesnt mean that the LED driver chip is faulty or damaged. This indicates the LED driver IC is still working and fine.

The highlighted components holds for the LCD screen of the Galaxy S 4G to operate properly, if those said components become faulty or damaged it will result to a display problem issues. You may need to check those components if after or before changing the LCD screen module.

This solution covers to fix and repair Nokia X3 Hands Free Speaker No audio sounds can be heard or No ringtone sounds. the solution below shows particular components that needs to be check  or by then replace if found damaged. If the loud speaker component is working well when checked up, you may proceed to check this highlighted  components showed below, for it where the audio sounds signals is feeds from the audio IC module.Nokia X3 keypad problem full solution


Those components were composed of filter coils, it is easy check each of them by using a multimeter in a continuity test method. There are two channels in Hands Free speaker circuit the left speaker channel and the right channel. If only one channel is not working, you may concentrate only on that certain part. Just configure the solution above.

Nokia Mobile C3-01 Charging Problem How to Fix problem 100% Tested,Nokia Mobile C3-01 Charging Ways Damage How to Fix problem,Nokia Mobile C3-01 Charging Not show input Charger On mobile How to Fix problem 100% Tested.

Nokia Mobile C3-00 Charging no response.Charging Ways Jumper How to Fix problem 100% Tested.

Nokia 1280 Kepad Led & Display light solution.